Pylon Locking Plate System (PLS)

The Pylon Locking Plate System is a proven osteosynthesis system designed to effectively treat a variety of pilon fractures.

A special feature of this system is the optional choice of hole configuration, which allows the selection of locking or non-locking screws for each hole (except compression and elongated). With a choice of +/- 15° angle, the system offers particular versatility, especially for complex fractures.

Categories ITS Implants, Plates, Lower limbs Trademark: ITS

Pylon Plate Small

Multi-directional Locking
Anatomically shaped
5 distal plate holes for optimal fixation close to joint
Pointed proximal plate end for percutaneous insertion
Plate lengths: 4, 6, 8-hole
Plate strength: 2.5mm

Pylon Plate

Multi-directional Locking
Anatomically shaped
6 distal plate holes for optimal fixation close to joint
K-Wire holes for preliminary plate fixation
Pointed proximal plate end for percutaneous insertion
Plate lengths: 4, 6, 8, 10-hole
Plate strength: 4.0mm

Panel technology. ONE technology for all implants. All ITS. plates are made of Grade 2 titanium, while the screws are made of a harder titanium alloy. This allows the plates to have only threadless holes, all of which (with the exception of the elongated holes) accept both non-locking and locking screws.